Get information on products and offers of ELKO EP
| Type | Design | Type | Senzor | Supply voltage | Temperature range | Hysteresis | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Analog | Digital | In-built | External | Type | AC 230V | AC 24V | AC/DC 24..240V | Galv. oddělení | ||||
| ATR | ELEGANT | • | • | NTC | • | +5.. +40 °C | 1K | |||||
| ATF | ELEGANT | • | • | NTC | • | +5.. +50 °C | 1K | |||||
| ATC | ELEGANT | • | • | • | NTC | • | +5.. +50 °C | 1K | ||||
| DTR | ELEGANT | • | • | NTC | • | +5.. +50 °C | 0.5 - 1K | |||||
| DTF | ELEGANT | • | • | NTC | • | +5.. +50 °C | 0.5 - 1K | |||||
| DTC | NTC | • | • | • | NTC | • | +5.. +50 °C | 0.5 - 1K | ||||
room thermostat with temperature range +5.. +40 °C with a built-in sensor
floor thermostat with temperature range +5.. +50 °C with external sensor
function „temporary temperature change“ in range ±10 °C (decreasing/increasing temperature)
room and fl oor thermostat, sensors are connected in series and block each other
function „temporary temperature change“, fix -5 °C (night decline)
temperature range +5.. +50 °C for both sensors, adjustable separately
is possible to use it without external sensor
Night decline is activated by a pushbutton on device or external contact (only ATR)
Night decline setting is done by an auxiliary button 2(under main button, only ATR/ATF)
nastavení ofsetu (kalibrace ±10 °C) with „known“ thermometer
external sensor (TC-3, 3m) is a part of delivery (only ATF/ATC), it is possible to extend its length up to 100m
design Obzor ELEGANT*, wide range of colours, possibility to combine more frames together
