ELKO EP - Always more

Select country:
 
 

 

Power suppliesStabilized voltage 12V, 24V

PSB-10Switching power supply PS

PS-30-24Switching power supply PS

PS-10-12Switching power supply PS

PS-100-12, 24VSwitching power supply PS

DR-60-12Switching power supply DR, 12V DC

DR-60-24Switching power supply DR, 24V DC

ZNP-10-12Power supply, 12V AC/DC

ZNP-10-24Power supply, 24V AC/DC

« 000 »
Type Design Vstup Vstup Protection against overload
AC DC Output voltage Output current Kapcs.üzemű (S) / Analóg (L) Safety fuse Elektonic fuse Short-circuit-proof
PSB-10        S    
PS-30-24 3-MODUL AC 230 V, -15/+10%  • 1 DC 24 V 1.25 A S • •  
PS-10-12        S    
PS-100-12, 24V        S    
DR-60-12 4.5-MODUL AC 100-240V, DC 124-370 V  • 1 DC 12 V 4.5 A S  •  
DR-60-24 4.5-MODUL AC 100-240 V, DC 124-370 V  • 1 DC 24 V 2.5 A S  •  
ZNP-10-12 3-MODUL AC 230 V, -15/+10% • •  AC 12 V, DC 12 V 0.8 A S •   
ZNP-10-24 3-MODUL AC 230 V, -15/+10% • •  AC 24 V, DC 24 V 0.4 A S •   

PS-30-24:Switching power supply PS

  • PSB-10: switching stabilized power supplies with fixed output voltage, for mounting into an installation box (such as KU-68)
    - PSB-10-12 - stabilized power supply 12V/10W
    - PSB-10-24 - stabilized power supply 24V/10W
  • PS-10: switching stabilized power supplies with fixed output voltage, version 1-module
    - PS-10-12 - stabilized power supply 12 V/10 W
    - PS-10-24 - stabilized power supply 24 V/10 W
  • PS-30: switching stabilized power supplies, version 3-module
    - PS-30-12 - stabilized power supply with fixed output voltage 12 V/30 W
    - PS-30-24 - stabilized power supply with fixed output voltage 24 V/30 W
    - PS-30-R – stabilized regulated power supply 12-24 V/30 W
  • PS-100: stabilized power supply with fi xed output voltage, version 6-module
    - PS-100-12 - stabilized power supply 12 V/100 W
    - PS-100-24 - stabilized power supply 24 V/100 W
  • Output current is limited by electronic fuse, in case maximal current is exceeded, the device switches off and after a shot time interval it again switches on.
  • Indication of output voltage by green LED on front panel (without PSB)
  • Indication of overload by red LED on front panel – only for PS-30-R.
  • Temperature protection – if temperature is exceeded, the device switches off and after cooled down, it switches on again.
Full size
 

Information provided by: ©2011 ELKO EP

HomeAbout usProductsSalesFairs 2012DownloadContact