Information by e-mail

Get information on products and offers of ELKO EP

ProductsRF Control - wireless control system

RF TouchWireless central unit

RFWB-20, RFWB-40RF transmitter: Universal transmitting module

RF KEYRF transmitter

RFDA-11B/US, RFDA-71B/USRF receiver: Dimming actuator

RFSA-61M/US, RFSA-66M/USRF receiver: Switching actuator

RFIM-20B, RFIM-40BRF transmitter: Universal transmitting module

RFTC-10/G/USRF transmitter: Temperature regulator

RFSG-1M/USRF transmitter: Transmitting module

RFTI-10B/USRF transmitter: Wireless thermo-sensor

RFDAC-71B/USRF receiver: Actuator with analog output 0(1)-10V

RFSTI-11B/US, RFSTI-11/G/USRF Combined modules: Switching actuator with thermo-sensor

« 000 »

RF - systém bezdrátového ovládání			Number of functions	Function	Output	Load
RF Touch
RFWB-20, RFWB-40	Elegant	Transmitter	2 buttons	Controller	-	-
RF KEY
RFSA-11B/US, RFSA-61B/US, RFSA-62B/US
RFDA-11B/US, RFDA-71B/US
RFSA-61M/US, RFSA-66M/US
RFIM-20B, RFIM-40B
RFJA-12B/120 V/US, RFJA-12B/24 V DC/US
RFTC-10/G/US
RFSG-1M/US
RFTI-10B/US
RFDAC-71B/US
RFSTI-11B/US, RFSTI-11/G/US

actuator is designated for continous regulation of device, which is operated by voltage 0(1)-10V it is aplicable for:
- dimming of fluorescent lights -in combination with dimmable ballast
- controlling of power dimmers
- controlling of thermo-regulators such as thermo-valves, heating stopcocks, ventilation etc.
easy operation:
- short press of transmitter button will close/open the circuit of appliance and set the analog output voltage onto its last set level
- long press enables an analog output voltage regulation in range 0(1)-10V
one actuator can be operated by up to 32-channels(1 channel represents 1 button on the wireless pushbutton, key-fob or RF Touch unit)
possibility to connect receivers with transmitters or with unit RF Touch
enables output switching in mode: 0-10V max.10mA or 1-10V max.10mA
RFDAC-71B/US: multifunction-7 programming functions: 6various „lighting scenes“, ON/OFF function
programming and manual operating is performed by button Prog
version into installation box (e.g. KU-68)