Information by e-mail

Get information on products and offers of ELKO EP

ProductsRF Control - wireless control system

RF TouchWireless central unit

RFWB-20, RFWB-40RF transmitter: Universal transmitting module

RF KEYRF transmitter

RFDA-11B/US, RFDA-71B/USRF receiver: Dimming actuator

RFSA-61M/US, RFSA-66M/USRF receiver: Switching actuator

RFIM-20B, RFIM-40BRF transmitter: Universal transmitting module

RFTC-10/G/USRF transmitter: Temperature regulator

RFSG-1M/USRF transmitter: Transmitting module

RFTI-10B/USRF transmitter: Wireless thermo-sensor

RFDAC-71B/USRF receiver: Actuator with analog output 0(1)-10V

RFSTI-11B/US, RFSTI-11/G/USRF Combined modules: Switching actuator with thermo-sensor

« 000 »

RF - systém bezdrátového ovládání			Number of functions	Function	Output	Load
RF Touch
RFWB-20, RFWB-40	Elegant	Transmitter	2 buttons	Controller	-	-
RF KEY
RFSA-11B/US, RFSA-61B/US, RFSA-62B/US
RFDA-11B/US, RFDA-71B/US
RFSA-61M/US, RFSA-66M/US
RFIM-20B, RFIM-40B
RFJA-12B/120 V/US, RFJA-12B/24 V DC/US
RFTC-10/G/US
RFSG-1M/US
RFTI-10B/US
RFDAC-71B/US
RFSTI-11B/US, RFSTI-11/G/US

RF shutter actuator is designated for switching of engines of shutters, blinds, Venetian blinds, garage doors etc.
RFJA-12B/120 V/US:
- switching of electric engines 120 V AC, which are operated in two- ways and have an inbuilt protective limit switch
- time function of relay is „memorizing“ the duration of pulling up and down the shutters
RFJA-12B/24 V DC/US:
- controlling of in-between window shutters (electric engines 12-24 V DC) with an inbuilt limit switch, where is the direction controlled by changing of polarity
- time function -actuator is „memorizing“ the duration of pulling up and down the shutters
- contact-free, noise-free switching
one actuator can be operated by up to 32-channels (1 channel represents 1 button on the wireless pushbutton, key-fob or RF Touch unit)
status of device is signalized by LED diode on the front panel
programming and manual operating is performed by button Prog
designated for mounting into installation box (e.g. KU-68) or into non-conductive covers of unit
possibility to connect receivers to systems RF Control and RF Touch