ELKO EP - Always more

Select country:
 
 
 

ProductsRF Control - wireless control system

RF TouchWireless central unit

RFWB-20, RFWB-40RF transmitter: Universal transmitting module

RF KEYRF transmitter

RFSA-11B/US, RFSA-61B/US, RFSA-62B/USRF receiver: Switching actuator

RFDA-11B/US, RFDA-71B/USRF receiver: Dimming actuator

RFSA-61M/US, RFSA-66M/USRF receiver: Switching actuator

RFIM-20B, RFIM-40BRF transmitter: Universal transmitting module

RFJA-12B/120 V/US, RFJA-12B/24 V DC/USRF receiver: Shutter actuator

RFTC-10/G/USRF transmitter: Temperature regulator

RFSG-1M/USRF transmitter: Transmitting module

RFTI-10B/USRF transmitter: Wireless thermo-sensor

RFDAC-71B/USRF receiver: Actuator with analog output 0(1)-10V

RFSTI-11B/US, RFSTI-11/G/USRF Combined modules: Switching actuator with thermo-sensor

« 000 »
RF - systém bezdrátového ovládání Number of functions Function Output Load
RF Touch       
RFWB-20, RFWB-40 Elegant Transmitter 2 buttons Controller 
RF KEY       
RFSA-11B/US, RFSA-61B/US, RFSA-62B/US       
RFDA-11B/US, RFDA-71B/US       
RFSA-61M/US, RFSA-66M/US       
RFIM-20B, RFIM-40B       
RFJA-12B/120 V/US, RFJA-12B/24 V DC/US       
RFTC-10/G/US       
RFSG-1M/US       
RFTI-10B/US       
RFDAC-71B/US       
RFSTI-11B/US, RFSTI-11/G/US       

RFSG-1M/US:RF transmitter: Transmitting module

  • transmitting module serves for wireless transmisson of command from load/technology
  • its biggest advantage is120 V supplying, so that can manage frequent signal transmissions
  • it is useful for:
    - wireless transmission for switching of appliances and el.devices
  • by connection of voltage onto terminals S1-S2, module transmits periodically a signal „close“ in interval 10 min.
  • when voltage is disconnected, transmitts a signal „switch off“
  • transmission is signalized by LED diode on the front panel
  • possibility of connection with RF receivers RF Control (esp. applicable-switching receivers)
  • transmitters can operate unlimited number of receiving units, which are in the range of RF signal
  • supplying is galvanically separated
  • version 1-MODULE, mounting onto DIN rail, designated for installation into switch-board
  • standardly delivered as a set with internal antenna, external antenna delivered only on request
 

Information provided by: ©2012 ELKO EP