his year we introduced new type of thermostats with IP 65 suitable for installation in exterior:
TEV-1 in IP 65 box is a device with "dead zone" suitable for protection against freezing and heating management.
TEV -2 in IP 65 box is a simple device for heating regulation
TEV-3 in IP 65 box is the same device as TEV-2 but equipped by potentiometer and indication on its front cover

THERMO - Room and Floor Therostats in design Elegant:
We offfer you analogue and digital solution
ATR: analogue room thermostat (in-built sensor)
ATF: analogue floor thermostat (external sensor)
ATC: analogue thermostat for room and floor heating (external sensor)
DTR: digital room thermostat (in-built sensor)
DTF: digital floor thermostat (extenal sensor)
DTC: digtal thermostat for romm and floor heating (external sensor)
These thermostats doesn´t contain frames and sensors. To receive full complete thermostat with frame and external sensor(standard delivery is 3 meters - for a possibility of longer sensor ( up to 100 meters) consult with your ELKO EP contact person) you need to order THERMO sets:

example: DTF set ( you will receive: DTF thermostat, white frame, 3 m. long sensor)
* In case you wish for a colored frame or longer sensor, it is possible, but please indicate it clearly in your order.

Single Thermostats TER-3x:
TER-3A .... -30..+10°C .... simple thermostat into a switchboard with an external sensor for temperature monitoring in cooling and freezing
TER-3B ... 0.. +40°C ....... simple thermostat into a switchboard with an external sensor for sensing room and operational temperature
TER-3C ... +30 ..-70°C .... simple thermostat into a switchboard with an external sensor for temperature sensing of devices (overheating)
TER-3D ... 0..+60°C ....... simple thermostat into a switchboard with an external sensor for monitoring of operational temparature of machines and devices
TER-3E ... 0..+60°C ........ as TER-3D but ith fixed hysteresis
TER-3F ... 0..+60°C ........ simple thermostat into a switchboard with an in-built sensor for monitoring of opartional temperature in switchboards
TER-3G ... 0..+60°C ....... as TER-3D but with an input for sensor PT 100
TER-3H ... -15... +45°C .. as TER-3A but with adjusted temperature range - for cooling and heating

Multifunction thermostats:
TER-4 ... -40 ... +110°C ... double thermostat ( 2 inputs, 2 outputs)possibility of setting - two dependent/independent thermostats
TER-9 ... -40.....+110°C ... digital thermostat with 6 functions, in-built time switch clock, 2 inputs, 2 outputs


Monitoring temperature of motors:

TER-7 ... thermistor relay for protection of motor, input designated for PTC sensor which is in-built in motor winding



As an acessory to our thermostats please check our sensors TC, TZ and PT 100 here.