Wired electroinstallation (BUS)
Central unit CU3-01M
Brain of iNELS system
CU3-01M and CU3-02M are central units’ of the iNELS system and mediators, between user software interface and controllers, units and actuators connected to the BUS.
It‘s possible to directly connect up to 2 lines of BUSes in to CU3-01M and CU3-02M, and on each BUS we can connect up to 32 iNELS3 units.
The main diff erence between CU3-02M and CU3-01M is that
is moreover equipped by RF module which enables communication with selected units from iNELS RF Control system.
User´s project and retentive data are stored in a non-volatile internal memory hereby data are backed up without the supply voltage. Real time clock (RTC) backup for 10 days.
Power supply controlling system - network voltage and the status of the backup battery.
Possibility of setting time synchronization via NTP server.
The RJ45 Ethernet port‘s connector is located on the front panel of the unit, the transmission speed is 100 Mbps.
For CU3-01M (02M) it is possible to use 4 potential-free inputs for connecting external controllers (buttons, switches, sensors, detectors, etc.) and 2 analog inputs 0 - 30V.
CU3-01M (02M) comes with OLED display that shows the current status and enables settings (network settings, date, time, service) of the central unit CU3-01M (02M).
Movement in the menu CU3-01M (02M) using arrows on the front panel.
CU3-01M (02M) in 6-MODULE are designed for mounting into a switchboard on the EN60715 DIN rail.
Inputs: 4x NO or NC to GND (-) 2x analogue inputs 0÷30
Supply voltage / tolerance: 27 V DC, -20 / +10 %
Dissipated power: max. 3 W
Degree of protection: IP20 devices, IP40 with cover in the switchboard
Installation: to the switching board on the EN60715 DIN rail
Dimensions: 90 x 105 x 65 mm
Weights: 288 g
Format: pdf | Size : 281 kB | 21. 11. 2019
Format: pdf | Size : 260 kB | 21. 04. 2020
Manual multilanguage CU3-0xM
Format: pdf | Size : 2 MB | 21. 04. 2020
Central unit CU3-02M
Central units CU3-01M and CU3-02M are the brain of the iNELS system, a "mediator“between user‘s programming environment and controllers, units and actuators connected to the BUS.
Central unit CU3-03M
CU3-03M is a new, enhanced version of CU3-01M and CU3-02M.
Central unit miniCU CU3-07M
CU3-07M is a small central unit of 1M size for managing small projects such as a hotel room, small apartment or cottage.
+420 573 514 242
+420 770 177 028