Three channels dimmer for LED (RGB) strips
RFDA-73M/RGB

The dimmer for LED strips is used for independent control of 3 singlecolour LED strips or one RGB LED strip.

DESCRIPTION

  • The expanded selection of control modes enables it to be combined with:
    a) detectors, controllers and system units iNELS RF Control
    b) device with output signal 0 (1) -10 V
    c) potentiometer.
  • The unit‘s three-module design with switchboard mounting enables connection of dimmed load 3x 5 A, which represents:
    a) single-colour LED strip 7.2 W – 3x 8 m
    b) RGB LED strip 14.2 W – 10 m.
  • 6 light functions - smooth increase or decrease with time setting 2 s - 30 min. 
  • The dimmer may be controlled by up to 32 channels.
  • The power supply of the unit is in the range of 12-24 V DC, and is indicated by a green LED.
  • The package includes an internal antenna AN-I , in case of locating the unit in a metal switchboard, you can use the external antenna AN-E for better signal reception.
  • Memory status can be pre-set in the event of a power failure.
  • Range up to 160 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
  • Communication frequency with bidirectional protocol RFIO2.

TECHNICAL PARAMETERS

  • Supply voltage: 12-24 V DC stabilized 
  • Number of channels: 3
  • Wireless: up to 32 channels (buttons) 
  • Mounting: DIN rail EN 60715 
  • Protection: IP20 from front panel 
  • Dimensions: 90 x 52 x 65 mm 
  • Weight: 130 g 

Downloads

Calendar

<
October 2020
>
  • Mo
  • Tu
  • We
  • Th
  • Fr
  • Sa
  • Su
  •  
  •  
  •  
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

Customer Centre

Technical support

+420 573 514 242
support@elkoep.com

Complaints technician

+420 770 177 028
balla@elkoep.com