iNELS Air - IoT devices
Flood detector AirSF-100L
Coming soon - this product has not yet been released for sale.
The flood detector is used to detect water leakage - the activation occurs the moment the fl ooding of the contacts located on the underside of the detector occurs.
Provides a quick solution to learn about unwanted fl ooding in your bathroom or kitchen that you can react too immediately.
With a wireless Sigfox / LoRa / NB-IoT communication network the device can be immediately put in the desired location and run immediately.
Anti-sabotage function - the detector contains a motion sensor and sends a message to the server during any unauthorized manipulation.
Flood detection is signalled by vibration, optical and acoustic signalling. In the case of water detection, data is sent to the server, ...
Data is sent to the server from which it can be subsequently displayed as a smartphone, application, or
Anti-sabotage: If access to the device is unauthorized, a message is immediately sent to the server.
Power supply: 1x CR123A battery life approx. 2 years (depending on frequency of use).
Battery power: 1x CR123A battery
Battery life: approx. 2 years (depending on frequency of use)
Alarm Detection: message to the server, vibration, optical and audible alarm
Acoustic signal: greater than 85 dB
Detection principle: contact between the sensor sensed liquid
Measurement accuracy: 99.8 %
Sensitivity: in the range 0.03 - 20 kΩ
Transmitter frequency: 868 MHz
Range in open space: Approx. 10 km (Depending on network coverage)
Working temperature: 0…+50°C (Pay attention to the operating temperature of batteries)
Operation position: capture contacts for fl ooding downwards
Protection degree: IP68
Dimension: Ø 89 x 23 mm
Weight: 25 g (without battery)
Format: pdf | Size : 75 kB | 30. 01. 2020
Format: pdf | Size : 259 kB | 30. 01. 2020
Manual multilanguage AirSF-100
Format: pdf | Size : 1 MB | 30. 01. 2020
+420 573 514 242
+420 770 177 028