Wireless electroinstallation (RF)
Glass touch controller
- 2 buttons, BLACK SHARP RFGB-20/B
The sale: July 2020
The glass touch controller is a design RF (wireless) Control unit and is available in elegant black and white variants.
Only 8 mm thick.
RFGB-20: 2 capacitive buttons allows to control 2 devices.
RFGB-40: 4 capacitive buttons allows to control 4 devices.
When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF / ON, blinds up/down). Sending a command is indicated by a red LED.
Option of setting light scenes, where with a single press, you can control units of iNELS RF Control.
The rear base allows to be attached to installation using screws, double- sided tape or keeping controller on the table.
Battery power supply (2x 3 V/CR2032 - included in the supply) with battery life of around 2 years based on frequency of use.
Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO.
Supply voltage: 2x 3 V CR 2032 battery
Transmission indication: red LED
Number of capacitive buttons 2
Range: in free spaceup to 200 m
Operating position: any
Dimensions: 94 x 94 x 8 mm
Weight: 122 g
Datasheet RFGB-20 40
Format: pdf | Size : 421 kB | 24. 06. 2020
+420 573 514 242
+420 770 177 028