Wall RFID card reader GMR3-61 is designed for reading of contactless media (chip cards, key fobs, tags, etc.), which are used for controlling access to buildings or parts of buildings.
With the glass controller GMR3-61 users will appreciate the elegant design and the easy of control using six touch buttons, which can be assigned diff erent control functions lighting, shading, scenes, heating, etc.
GMR3-61 a design element of the (control) system iNELS and is available in black (GMR3-61/B) and white (GMR3-61/W) variants.
GMR3-61 reader can be used to control the security system (locking / unlocking) access system (opening doors, gates, etc.) or appliances (based on assigned rights).
GMR3-61 supports RFID media with the carrier frequency of 13.56 MHz. Supported card types MIFARE Ultralight, DESFire 2K, Plus S 4K.
The GMR3-61 is also equipped with 8A relay output with changeover contact AgSnO2, which can be switched directly by reader (or by any controller in the system).
Between each pair of touch keys is a pair of indicator LEDs (Green, Red) to indicate the status of the controlled appliance, or the state of any sensor or actuator in the system.
Located on each touch button is a blue LED indicator, signalling the touch of a button. Touching may also be signalled by a vibrating pulse or audible tone - optionally in the software iDM3.
All variants of GMR3-61 are available in sizes of luxury controllers LOGUS90 (94 x 94 mm).
GMR3-61 reader is equipped with a sensor of ambient light intensity. Based on information from the sensor can switch the orientation of blue LEDs on the touch-pad GSB3 or perform various actions with the software iDM3, eg. To control the lighting circuits in the corridor and others.
GMR3-61 cannot be installed into multiple frames they are designed for mounting into installation boxes.
E-shop
English
Česky
Slovensky
Deutsch
русский
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
English GB
Српски
Polski
