RFDEL-76M is a universal six-channel actuator, which is used to control the brightness intensity of dimmable sources R - L - C - LED - ESL.
The maximum possible load is 150 VA for 230 V and 75 VA for 120 V for each channel.
The individual channels of the dimmer can be connected in parallel and thus increase the maximum output load at the expense of the number of outputs.
Each of the output channels is individually controllable and addressable.
By setting the min. brightness eliminates fl ickering of diff erent types of light sources, setting min. brightness and type of load is done using the PROG buttons.
Electronic overcurrent, thermal and short-circuit protection, which switches off the output.
6 galvanically isolated inputs for wired buttons, which can be used to control the outputs independently of the RF.
Communication with bidirectional RFIO2 protocol. The package includes an internal AN-I antenna, in case of placement of a sheet metal distribution element, you can use an external AN-E antenna to improve the signal.
Dimmable loads: R - L - C - ESL - LED
Output: 12x MOSFET
Output loads: 6x 150W (230V) / 6x 75W (120V)
Protections: overheating and overload
Supply voltage (frequency): 230 V (50 Hz) or AC 120 V (60 Hz)