Switch unit for shutters
RFJA-32B

The switching unit for blinds has 2 output channels used to control garage doors, gates, blinds, awnings, etc.

DESCRIPTION

  • It can be combined with Control or System units iNELS RF Control.
  • RFJA-32B/230V (120V): relay contacts 2x 8 A (2x 2000 W), with the possibility of connecting external buttons. The relays block each other (only one direction of movement at a time).
  • RFJA-32B/24VDC: contactless quiet switching with the ability to connect existing buttons. The drive is controlled by changing the polarity.
  • Short presses (<2 s) of the controller enable tilting of lamellas, and a long press (>2 s) enables you to draw the blinds up or down to the end position.
  • Each of the units may be controlled by up to 25 channels.
  • The programming button on the unit is also used for manual control of the output.
  • Range up to 100 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
  • Communication frequency with bidirectional protocol RFIO2.
  • The BOX design lets you mount it right in an installation box, a ceiling or motor drive cover.

TECHNICAL PARAMETERS

  • Supply voltage: 230 V AC 
  • Dissipated power: 0.7 W 
  • Number of contacts:  2 x switching 8 A (AgSnO2)
  • Wireless: up to 25 channels (buttons) 
  • Mounting: free at lead-in wires 
  • Protection: IP30
  • Dimensions: 49 x 49 x 21 mm 
  • Weight: 46 g 

Downloads

Calendar

<
July 2020
>
  • Mo
  • Tu
  • We
  • Th
  • Fr
  • Sa
  • Su
  •  
  •  
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

Customer Centre

Technical support

+420 573 514 242
support@elkoep.com

Complaints technician

+420 770 177 028
balla@elkoep.com