Wireless contact converter - RFIM-20B, RFIM-40B

Wireless contact converter can transform your existing button / switch to the wireless one

DESCRIPTION

  • It can be used to transfer an information about the contact status (close) - e.g. detector, button, technology, output.

2 types of switchers:
RFIM-20B - 2 inputs, intended for switching with button or impulse, and also for permanent contact = switch.
RFIM-40B - 4 inputs, intended for switching with button or impulse.

  • 2 or 4 inputs enable your to control 2 units independently of each other.
  • After pressing the button, the set commands are transmitted (ON/OFF, dimming, scheduled OFF/ON, roll up / down).
  • The possibility to set scenes - by one touch you can control more iNELS RF Control units.

TECHNICAL PARAMETERS

  • Battery-powered (3V/CR2477 or 2x3V/CR2477 - included in the package), battery life is up to 5 years.
  • Range up to 200 m (free open space), in the case of insufficient signal between controller and unit, please use the signal repeater - RFRP-20.
  • Communication frequency 868 MHz with two-ways protocol iNELS RF Control.
  • BOX design intended to be mounted directly into an installation box/under the existing button/switch

Downloads

Calendar

<
August 2019
>
  • Mo
  • Tu
  • We
  • Th
  • Fr
  • Sa
  • Su
  •  
  •  
  •  
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

Customer Centre

Reception

+420 800 100 671
elko@elkoep.com

Technical support

+420 573 514 242
support@elkoep.com