Glass touch controller - 4 buttons, WHITE SHARP RFDW-71/W
Start of sales: October 2020
Wireless glass designed switch with integrated dimming component which serves to regulate light sources:
- R – classic lamps
- L – halogen lamps with wound transformer
- C – halogen lamps with electronic transformer
- ESL – dimmable energy-effi cient fl uorescent lamps
- LED – LED light sources (230 V).
4 channel switch version allows you to control the integrated dimmer as well as other components of the installation.
They can be combined with detectors, controllers, iNELS RF Control or system components.
6 light functions - smooth increase or decrease with time setting 2 s-30 min.
When switched off , the set level is stored in the memory, and when switched back on, it returns to the most recently set value.
Thanks to setting the min. brightness by potentiometer, you will eliminate flashing of the LED and ESL light sources.
The universal dimmer may be controlled by up to 25 channels (1 channel represents 1 button on the controller).
The programming button on the controller is also used for manual control of the output.
Memory status can be pre-set in the event of a power failure.
For components it is possible to set the repeater function via the RFAF / USB service device.
Range up to 160 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2).
Dimmed load: R,L,C, LED, ESL
Temperature measuring: YES, built-in temperature sensor
Scope and accuracy of temp. measurement: 0.. +55°C; 0.3°C from the range
RF command from the detector: 866 MHz, 868 MHz, 916 MHz