Pulse converter - AirTM-100S

DESCRIPTION

• The Pulse converter counting quantities of pulses from the energy meters (electricity, water, gas).
• The Pulse converter is designed for use on existing gauges even without impulse output „S0“ (gauge must support sensing).
• AirTM-100 converts gauge consumption using sensors - LS (LED sensor), WS (magnetic sensor for water meter), MS (magnetic sensor) or pulse output.
• For each power meter it is necessary to have one Pulse converter AirTM-100.
• With the wireless solution and Sigfox / LoRa / NB-IoT communication, it can communicate instantly to your chosen location and be operated immediately.
• Data is sent to the server from which it can be subsequently displayed as a smartphone, application, or Cloud notification
• Anti-sabotage: If access to the device is unauthorized, a message is immediately sent to the server.
• Power supply: 5-12 V DC or 1x 3.6 V batteries SAFT with approx. 5 years (depending on the frequency of use).
• In the case of external power, the battery is automatically disconnected and serves as backup power.
• Protection degree IP65.

TECHNICAL PARAMETERS

• Battery power: 1x 3.6V LS 14500 Li-SOCl₂ AA
• External power supply:  5 – 12 V DC (on terminal) 
• Standby consumption: 0.2 mW 
• Setting: With a message from the server using setting pins, SET button, programming cable
• Alarm Detection: message to the server 
• Protocol: Sigfox
• Transmitter frequency: RCZ1 868 MHz 
• Range in open space: Approx. 50 km
• Working temperature: 30…+60°C (Pay attention to the operating temperature of batteries
• Operating position: any
• Mounting: glue / screws 
• Protection degree: IP65
• Dimension: 182 x 62 x 34 mm  
• Weight: 100 g (without battery) 

 

Downloads

• Datasheet AirTM-100

  Format: pdf | Size: 60 kB | 01. 05. 2019

• Manual AirTM-100

  Format: pdf | Size: 227 kB | 13. 04. 2019

• Manual multilanguage AirTM-100

  Format: pdf | Size: 1 MB | 17. 04. 2019