Wireless electroinstallation (RF)
Switch unit, 1 channel - MULTI function RFSA-61M
Switching unit with 1 output channel 16 A is used for controlling appliances, sockets or lights.
The one-module design of the unit into a switchboard.
The switching unit may be controlled by up to 25 channels
They can be combined with detectors, controllers, iNELS RF Control or system components.
Function: button, impulse relay and time function of delayed start or return with time setting range of 2 s - 60 min.
The programming button on the unit is also used for manual control of the output.
The package includes an internal antenna AN-I, in case of locating the element in a metal switchboard, you can use the external antenna AN-E for better signal reception.
Memory status can be pre-set in the event of a power failure.
Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO2.
Supply voltage: 110-230 V AC
Dissipated power: 1.62 W
1x changeover 16 A (AgSnO2)
Wireless: up to 25 channels (buttons)
Mounting: DIN rail EN 60715
Protection: IP20 from the front panel
Dimensions: 90 x 17.6 x 64 mm
Weight: 74 g
Datasheet AN x
Format: pdf | Size: 84 kB | 28. 03. 2019
Format: pdf | Size: 304 kB | 11. 05. 2019
EC Declaration of conformity RFSA-61M 230V
Format: pdf | Size: 49 kB | 06. 12. 2019
Format: pdf | Size: 516 kB | 18. 12. 2018
+420 800 100 671
+420 573 514 242