On-wall button controller PLASTIC - 2 buttons
RFWB-20/G

On-wall button controller is used to control switches and dimmers (lights, gate, garage door, blinds, etc.).

DESCRIPTION

  • RFWB-20/G: two buttons enable control of two units independently.
  • The fl at design with level base makes it ideal for fast installation on any surface (fi xation with adhesive or screws in the installation box).
  • When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF/ON, blinds up/down).
  • Sending a command is indicated by a red LED.
  • In LOGUS90 switch frame design (plastic, glass, wood, metal, stone).
  • Option of setting light scenes, where with a single press, you can control units of iNELS RF Control.
  • Battery power supply (3 V CR 2032 battery - included in the supply) with battery life of around 5 years based on frequency of use.
  • Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
  • Communication frequency with bidirectional protocol RFIO.

  

TECHNICAL PARAMETERS

  • Supply voltage: 3 V CR 2032 battery
  • Number of buttons: 2
  • Communication protocol: RFIO
  • Operating position: any
  • Mounting: glue/screws
  • Protection: IP20
  • Dimensions frame: 85 x 85 x 16 mm
  • Weight (plastic): 38 g

Downloads

Calendar

<
November 2020
>
  • Mo
  • Tu
  • We
  • Th
  • Fr
  • Sa
  • Su
  •  
  •  
  •  
  •  
  •  
  •  
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

Customer Centre

Technical support

+420 573 514 242
support@elkoep.com

Complaints technician

+420 770 177 028
balla@elkoep.com