BUS separator from power supply BPS3-02M

• Units BPS3-01M and BPS3-02M serve for impedance separation of BUS from supply voltage power.
• BUS separator BPS3 or BPS3-01M-02M is required for each type CU3- 01M (02M) central unit and external master MI3-02M.
• BPS3-01M allows you to connect one BUS with max. load 3 A.
• BPS3-02M allows you to connect two separate BUS1 and BUS2 with max. load 1 A for each line.
• Outputs are equipped with overcurrent and overvoltage protection.
• Indication of output voltage outputs BUS LED.
• BPS3-01M and BPS3-02M in 1-MODULE version is designed for mounting into a switchboard, on DIN rail EN60715.

Technical parameters 

• Supply voltage / tolerance: 27 V DC, -20 / +10 % 
• Dissipated power: max. 0.5 W 
• Status indication voltage on terminals: 2 x green LED
• Protection degree: IP20 device, IP40 mouting in to the switchboard
• Installation: in a switchboard on DIN rail EN 60715 
• Dimensions: 90 x 17.6 x 64 mm 
• Weight: 85 g

Downloads

• Datasheet BPS3-0xM

  Format: pdf | Size : 322 kB | 18. 05. 2019

• Manual BPS3-0xM

  Format: pdf | Size : 129 kB | 21. 04. 2020

• Manual multilanguage BPS3-0xM

  Format: pdf | Size : 864 kB | 21. 04. 2020