Central unit CU3-02M

Brain of iNELS system with RF interface

  • It‘s possible to directly connect up to 2 lines of BUS in to CU3-01M and CU3-02M, and on each bus we can connect up to 32 iNELS3 units.
  • The main difference between CU3-02M and CU3-01M is that CU3-02M is moreover equipped by RF module which enables communication with selected units from iNELS RF Control system.
  • User´s project and retentive data are stored in a non-volatile internal memory hereby data are backed up without the supply voltage. Real time clock (RTC) backup for 10 days. Power supply controlling system - network voltage and the status of the backup battery.
  • Possibility of setting time synchronization via NTP server. 
  • The RJ45 Ethernet port‘s connector is located on the front panel of the unit, the transmissionspeed is 100 Mbps.
  • For CU3-01M (02M) it is possible to use 4 potential-free inputs for connecting external controllers (buttons, switches, sensors, detectors, etc.) and 2 analog inputs 0-30V.
  • CU3-01M (02M) comes with OLED display that shows the current status and configuration of CU3-01M (02M) central unit.
  • CU3-01M (02M) can be controlled using the directional buttons on the front panel. CU3-01M (02M) in 6-MODULE are designed for mounting into a switchboard on the EN60715 DIN rail

Downloads

Calendar

<
December 2019
>
  • Mo
  • Tu
  • We
  • Th
  • Fr
  • Sa
  • Su
  •  
  •  
  •  
  •  
  •  
  •  
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

Customer Centre

Reception

+420 800 100 671
elko@elkoep.com

Technical support

+420 573 514 242
support@elkoep.com