Join to our online upcoming free webinars...
Wired electroinstallation iNELS (BUS)
The actuator is designed for switching up to six various appliances and loads with potentialless contact.
SA3-06M is a switching actuator contains 6 independent relays with changeover potentialless contacts.
Maximum load per contact is 8 A/2000 VA/AC1.
Each of six output contacts are individually controllable and addressable.
The relays are divided into two groups, the group of four relays on the bottom terminal switches the common potential, a pair of relays on top of the terminal switches the second common potential.
The actuator is suitable for operating discontinuously controlled thermo drives in the distributor of floor heating.
LEDs on the front panel signals the status of each output.
Contact status of each relay can be changed separately and manually by control buttons on a front panel.
SA3-06M is normally supplied in the option AgSnO2 contact material.
SA3-06M in 3-MODULE version is designed for mounting into a switchboard/DIN rail EN60715.
Number of contacts: 6x CO, 8 A
Switching current: 8 A / AC1
Switching output: 2000 VA / AC1, 192 W/DC
Supply voltage (frequency): BUS 27 V DC
Rated current from BUS: 60 mA (at 27 V DC)
Dimensions: 90 x 52 x 65 mm
Format: pdf | Size : 160 kB | 07. 12. 2023
EC Declaration of conformity SA3-06M
Format: pdf | Size : 50 kB | 07. 12. 2023
Manual multilanguage SA3-06M
Format: pdf | Size : 1,004 kB | 07. 12. 2023
+420 800 100 671
+420 573 514 221