DA3-22M is a universal dimming two-channel actuator used to control light intensity of dimmable energy saving lamps (ESL), LED bulbs and R, L, C with power suppl 230 V AC, but you can also use the actuator for switching appliances.
DA3-22M integrates 2 binary inputs, which allow 230V AC voltage connection (normal wall switch contacts) These inputs are in taken in the software IDM as standard binary inputs.
DA3-22M has two MOSFET controlled outputs 230V AC, maximum load is 2x 400 VA.
Type of light source is set by a switch on the front panel.
By setting the min. brightness potentiometer on the front panel, flashing is eliminated of different types of light sources.
Buttons on the front panel, you can manually switch on or off the corresponding output.
Electronic overcurrent and thermal protection - switch off output in case of overload short circuit and overheating.
During installation, it is necessary to leave on each side of the actuator at least half the module space for better cooling.
DA3-22M in 3-MODULE version is designed for mounting into a switchboard on DIN rail EN60715.
E-shop
Česky
Slovensky
English
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
English GB
Српски
