Join to our online upcoming free webinars...

Analog controller, 0(1)-10V RFDAC-71B-SL


EAN: 8595188182676 | Code: 8267


  • The device with analog output 0(1)–10 V is used to control devices, luminaires, thermal actuators, and thermal heads – which are equipped with such an input.
  • They can be combined with detectors, controllers, iNELS Wireless, or system components.
  • Potential free analog output 0(1)–10 V, contact relay 8 A.
  • 7 light functions – smooth increase or decrease with time setting 2 s–30 min. 
  • The analog controller may be controlled by up to 25 channels.
  • The programming button on the controller is also used for manual control of the output.
  • Memory status can be pre-set in the event of a power failure. 
  • Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20N or protocol component RFIO2 that supports this feature.
  • The BOX design lets you mount it right in an installation box, a ceiling, or a light cover.


  • Output: 0(1) - 10 V / 10 mA
  • Supply voltage (frequency): AC 110-230 V (50/60 Hz)
  • Design: BOX
  • Dimensions: 49 x 49 x 21 mm
  • Protocol: RFIO2


Customer Centre


+420 800 100 671

Technical support