Central unit - CU3-01M

DESCRIPTION

• It‘s possible to directly connect up to 2 lines of BUSes in to
  CU3-01M and CU3-02M, and on each BUS we can connect up to 32 iNELS3 units.
• The main difference between CU3-02M and CU3-01M is that CU3-02M is moreover equipped by RF module which enables communication with selected units from iNELS RF Control system.
• User´s project and retentive data are stored in a non-volatile internal memory hereby data are backed up without the supply voltage. Real time clock (RTC) backup for 10 days.
• Power supply controlling system - network voltage and the status of the backup battery.
• Possibility of setting time synchronization via NTP server.
• The RJ45 Ethernet port‘s connector is located on the front panel of the unit, the transmission speed is 100 Mbps.
• For CU3-01M (02M) it is possible to use 4 potential-free inputs for connecting external controllers (buttons, switches, sensors, detectors, etc.) and 2 analog inputs 0 - 30 V.
• CU3-01M (02M) comes with OLED display that shows the current status and enables settings (network settings, date, time, service) of the central unit CU3-01M (02M).
• Movement in the menu CU3-01M (02M) using arrows on the front panel.
• CU3-01M (02M) in 6-MODULE are designed for mounting into
  a switchboard on the EN60715 DIN rail.

TECHNICAL PARAMETERS

• Inputs: 4x NO or NC to GND (-) 2x analogue inputs 0÷30
• Supply voltage / tolerance: 27 V DC, -20 / +10 %
• Dissipated power: max. 3 W 
• Degree of protection: IP20 devices, IP40 with cover in the switchboard 
• Installation: to the switching board on the EN60715 DIN rail 
• Dimensions: 90 x 105 x 65 mm 
• Weights: 288 g 

Downloads

• Datasheet CU3-0xM

  Format: pdf | Size : 349 kB | 20. 04. 2024

• Manual multilanguage CU3-0xM

  Format: pdf | Size : 2 MB | 20. 04. 2024