Central unit with 1x BUS, 1x DALI - CU3-09M/DALI

DESCRIPTION

• CU3-09M is one of the basic system control units of iNELS BUS installations.
• The unit can work independently, as an autonomous project, or it can be controlled by the IP-MASTER as part of a larger project.
• The unit is equipped with one BUS to switch it is possible to connect up to 32 elements from the iNELS BUS portfolio.
• The current load of one line is max. 1 A. BPS3-01M with 3 A can be used in the case of a connected device with more than 1 A.
• The CU3-09M/DALI system unit is equipped with one DALI bus. 
• The DALI system bus allows control of up to 64 independent DALI ballast addresses for luminaires.
• Addressing DALI can be done via the iDM3 software. 
• The RJ45 100 Mbps Ethernet connector is used for direct communication with the cloud for mobile app control or for communication with the superior unit within the iNELS IP topology.
• Configuration takes place in the iNELS3 Designer & Manager software (iDM3).
• Through iDM3 it is possible to update the firmware of central units and bus-connected peripheral units.
• The central unit is implemented with MQTT protocol for 3rd party communication.
• The unit is powered by 27 V DC from iNELS power supply. BUS1 can power the central unit.
• The system unit CU3-09M/DALI in 1-MODULE design is designed for mounting into a switchboard on DIN rail

Downloads

• Datasheet CU3-09M DALI

  Format: pdf | Size : 259 kB | 24. 04. 2024