Central unit with 2x BUS - CU3-08M

Description

• CU3-08M is one of the basic system control of iNELS BUS installations. 
• The unit can work independently, as an autonomous project, or it can be controlled by the IP-MASTER as part of a larger Project.
• The units is equipped with two BUS, to which it is possible to connect a total of up to 64 elements (2x32) from the iNELS BUS portfolio.
• The current load of one line is max. 1 A. BPS3-01M with 3 A can be used incase of connected device with more than 1 A.
• The RJ45 100 Mbps Ethernet connector is used for direct communication with the cloud for mobile app control or for communication with the superior unit within the iNELS IP topology.
• Configuration takes place in the iNELS3 Designer & Manager software (iDM3). Through iDM3 it is possible to update the fi rmware of central units and bus connected peripheral units.
• The units is powered by 27 V DC from inels power supply. BUS1 can power the central unit.
• System units CU3-08M in 1-MODULE design are designed for mouting into a switchboard on DIN rail EN60715

Downloads

• Datasheet CU3-08M

  Format: pdf | Size : 181 kB | 13. 12. 2023

• EC Declaration of conformity CU3-08M

  Format: pdf | Size : 46 kB | 02. 03. 2023