Controlled dimmer DIM-14

DESCRIPITON

• designated for dimming of el. bulbs and halogen lights with wound or electronic transformer and Dimmable LED.
• for switching and dimming of lights, control inputs for a button
• short pressing switches ON/OFF, longer pressing (> 0.5 s) enables gradual light intensity setting
• when switched off , brightness level is stored in a memory and when switched on again this last brightness level is restored
• supply voltage: AC 230 V
• output without contacts: 2x MOSFET
• LED output indication (with any level of brightness) possibility of parallel connection of control buttons
• Electronic overvoltage protection.
• Protection against over-heating inside the device - output off .
• Resistive, inductive or capacitive load, up to 500 W.
• 1-MODULE, DIN rail mounting.

TECHNICAL PARAMETERS

• Voltage range: AC 230 V / 50 Hz 
• Maximum consumption: 1.5 W 
• Output contact: 2x MOSFET
• Mounting: DIN rail EN 60715   
• LED indication: power supply - green, output - red 
• Protection degree: IP40 from front panel / IP10 terminals 
• Dimensions: 90 x 17.6 x 64 mm (3.5˝ x 0.7˝ x 2.5˝) 
• Weight: 61 g (2 oz.) 

Downloads

• Datasheet DIM-14

  Format: pdf | Size : 317 kB | 07. 12. 2023

• EC Declaration of conformity DIM-14

  Format: pdf | Size : 356 kB | 07. 12. 2023

• Manual multilanguage DIM-14

  Format: pdf | Size : 1 MB | 07. 12. 2023

• Tested types of light sources

  Format: pdf | Size : 246 kB | 07. 12. 2023