Analog controller - RFDAC-71B

Analog controller with output 0(1) - 10V serves for dimming fluorescent lamps

: 8595188142809 | : 4993

DESCRIPTION

Using for:
a)   dimming fluorescent lamps (using a dimmable ballast it is possible to connect up to 10pcs).
b)   dimming LED panels (using a a suitable source - up to 50pcs of LP-6060-3K/6K).
c)   thermo-valve (TELVA) control.
d)   other regulators control (e.g. power dimmers DIM-6).

6 lighting functions – continuous start or return with time setting range of 2s-30min.
When it turns off the set level is stored in memory and after switching ON it returns to the last set value.
Analog controller can be controlled by up to 32 channels (1 channel represents one button on the controller).
It is possible to combine with Controllers or System units of iNELS RF Control.

TECHNICAL PARAMETERS

Power supply AC 110 - 230.
Range up to 200 m (free open space), in the case of insufficient signal between controller and unit, please use the signal repeater - RFRP-20.
Output contact: 1x potential-free analog output 16A. (AgSnO2, 4000 VA/AC1).
Communication frequency (868MHz, 866MHz, 916MHz, 922MHz) with bidirectional protocol RFIO or RFIO2.
RFIO2 is an innovative iNELS RF Control wireless communication protocol, which brings you greater stability and eliminates signal collision between individual components.
BOX design intended to be mounted into an installation box, into the ceilings or into the light covers.

Tabulka zatížitelnosti světelných zdrojů [141 kB]