Simple wireless temperature controller - RFTC-10/G

The simple controller in design LOGUS 90 measures the room temperature by internal sensor, and based on the set temperature, it sends a command to control heating.

: 8595188145329 | : RFTC-10/G/BR standard

DESCRIPTION

The temperature controller can be used in one of two ways:
a) For controlling an additional heat source (heater, oil radiator, radiant panel) with multi-function switching units RFSA-6x, RFUS-61 or RFSC-61.
b) For sufficient temperature correction ( +/- 10 °C ) over the course of the program set in the system unit (change in temperature applies until the following set change of the heating program in the system unit).

The backlit LCD display displays the current and set temperature, status (ON/OFF), battery status, etc.
Manual control with using buttons on the device.
Sends the measured temperature to the system unit in regular 5-min. intervals. It sends a signal upon sudden temperature change.
Color combination of temperature unit in design of frames LOGUS 90 (plastic, glass, wood, metal, stone).
The flat rear side of the device enables its placement anywhere in the room where you wish to measure temperature.

TECHNICAL PARAMETERS

Battery power 2x AAA (1,5 V), with battery life of around 1 year based on frequency of use.
Range of measured temperature 0 - 55 °C.
Range up to 100 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20.
Communication frequency (868MHz, 866MHz, 916MHz, 922MHz) with bidirectional protocol RFIO or RFIO2.
RFIO2 is an innovative iNELS RF Control wireless communication protocol, which brings you greater stability and eliminates signal collision between individual components.
In the design of the switch with mounting into the installation box.