Wireless temperature controller - RFTC-50/G

The wireless controller in design LOGUS90 measures the room temperature by internal sensor, and based on the set temperature, it sends a command for heating / cooling.

: 8595188148641 | : RFTC-50/G/BR/BR standard

DESCRIPTION

The temperature controller can be used in one of two ways:
a) For controlling an additional heat source (heater, oil radiator, radiant panel) with multi-function switching units RFSA-6x, RFUS-61 or RFSC-61.
b) For control of floor heating, when the internal sensor scans the room temperature, and based on the value, controls the heating unit RFSTI-11B, which monitors the critical floor value by external sensor.

The backlit LCD display displays the current and set temperature, status (ON/OFF), battery status, day of the week, current time, etc.
Option of setting a daily/weekly automatic control program.
Manual control with using buttons on the device.
Sends measured temperature to the system unit in regular 5-min. intervals. It sends a signal upon sudden temperature change.
Color combination of temperature unit in design of frames LOGUS 90 (plastic, glass, wood, metal, stone).
The flat rear side of the device enables its placement anywhere in the room where you wish to measure temperature.

TECHNICAL PARAMETERS

Battery power 2xAAA (1,5 V), with battery life of around 1 year based on frequency of use.
Range of measured temperature: 0 °C to +55 °C.
Range up to 100 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20.
Communication frequency (868MHz, 866MHz, 916MHz, 922MHz) with bidirectional protocol iNELS RF Control.
In the design of the switch with mounting into the installation box.