The universal modular dimmer is used to regulate all light sources (R, L, C, ESL, LED).
:
8595188148979 (230V)
|
:
4897 (230V)
DESCRIPTION
6 light functions - smooth increase or decrease with time setting 2s-30 min.
When switched off , the set level is stored in the memory, and when switched back on, it returns to the most recently set value.
Thanks to setting the min. brightness by potentiometer, you will eliminate flashing of the LED and ESL light sources.
The universal dimmer may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
It is possible to combine with Controllers or System units of iNELS RF Control.
Connecting an existing button to the control input allows you to combine wireless control with the classic (wire).
In the case of placement in the metal switchboard, we recommend you to use an external antenna AN-E to improve signal transmission.
TECHNICAL PARAMETERS
Power supply AC 230 V or AC 120 V.
Range up to 160 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20.
Output contact: 2x contactless input (MOSFET 600 W při Cosφ=1).
Communication frequency (868MHz, 866MHz, 916MHz, 922MHz) with bidirectional protocol RFIO or RFIO2.
RFIO2 is an innovative iNELS RF Control wireless communication protocol, which brings you greater stability and eliminates signal collision between individual components.
E-shop
Česky
Slovensky
English
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
English GB
Српски
