Dimming actuator for electronic ballasts, 2-channel LBC3-02M
LBC3-02M is an analog two-channel actuator designed to control dimmable ballasts of fl uorescent lamps or other light sources controlled by signal
0(1) - 10 V DC.
In the iDM3, it is possible to set the output mode 0(1) - 10 V DC.
During analog voltage output (0)1-10 V DC control, relay contact automatically switches power supply to light ballast (0% = relay OFF, 1-100% = relay ON)
LBC3-02M contains 2 independent analog voltage outputs (0)1-10 V DC and their dependents 2 relays with potential-free contact.
Maximum contacts load 16 A/4000 VA/AC1.
Each of two channels is separately controllable and addressable.
LEDs on front panel signals status of each channel.
With control buttons on the front panel, it is possible to change the status of each channel separately.
LBC3-02M in 3-MODULE version is designed for mounting into a switchboard/ DIN rail EN60715.
TECHNICAL PARAMETERS
Number of control buttons: 2 buttons on the front panel
Output indication: 2x yellow LED
Installation BUS: BUS
Supply voltage / tolerance: 27 V DC, -20 / +10 %
Protection degree: IP20 device, IP40 mounting in the switchboard
E-shop
English
Česky
Slovensky
Bulgarien
Magyar
Ireland
Românește
Tiếng việt
Ukraine
Polski
