The dimmer for LED strips is used for independent control of 12 channels, so it can be connected to, for example:
3 RGBW led strips
3 RGB led strips + 2 single colour strips
12 single colour LED strips
The 3-module design of the device with mounting in the switchboard allows the connection of a dimmable load of 3x 15 A or 12x 3.75 A, which represents, for example: 3 pieces of RGBW LED strips 24V 20W/m = max 18m.
The dimmer is controlled by the central unit of the iNELS system.
The power supply of the LED strip is in the range of 0-50V DC.
Each of the output channels is separately controllable and addressable.
The actuator is equipped with electronic thermal protection, which switches off the output in case of overheating.
During installation, it is necessary to leave at least half a module of free space on each side of the actuator for better cooling.
DA3-03M/RGBW in 3-MODUL design is intended for installation in a switchboard on an EN60715 DIN rail.
Dimmable load: LED strip 12V, 24V, 48V; RGBW LED strip 12V, 24V, 48V