Monitoring voltage relay HRN-54N

DESCRIPTION

• Serves to monitor voltage , phase failure and sequence in switchboards. 
• Supply is done from monitored voltage.
• Fixed T1(500ms) and adjustable T2 (0.1 – 10 s) delay to eliminate short voltage drops and peak.
• In case supply voltage falls below 60 %Un (Uoff lower level)relay immediately breaks with no delay
• It is possible to set upper and lower level of monitoring voltage.
• Monitoring voltage relay in 2 variants:

HRN-54: supply from all phases which means that relay is functional also in case when one phase is faulty
HRN-54N: supply L1-N, means that relay monitors also failure of neutral wire

• Faulty state is indicated by red LED and by breaking output relay contact.

TECHNICAL PARAMETERS

• Monitored power voltage: 

HRN-54: 3 x 400 V 
HRN-54N: 3 x 400 V/ 230 V

• Umax: 105 – 125% of monitored voltage.
• Umi): 75 – 95% of monitored voltage.
• Output contact: 1x changeover 8 A/250 V AC1 (AgNi, 2500 VA).
• 1-MODULE, DIN rail mounting.

Downloads

• Datasheet HRN-54 54N

  Format: pdf | Size: 335 kB | 27. 07. 2019

• Manual HRN-54 54N

  Format: pdf | Size: 210 kB | 31. 05. 2019

• Manual multilanguage HRN-54 54N

  Format: pdf | Size: 2 MB | 31. 05. 2019