On-wall button controller - 4 buttons - RFWB-40/G

EAN: 8595188140607 | Code: 8098

DESCRIPTION

On-wall button controller is used to control switches and dimmers (lights, gates, garage doors, blinds, etc.).
RFWB-20/G: two buttons enable control of two units independently.
RFWB-40/G: four buttons enable control of four units independently.
The flat design with a level base makes it ideal for fast installation on any surface (fixation with adhesive or screws in the installation box).
When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF/ON, blinds up/down).
Sending a command is indicated by a red LED.
In LOGUS90 switch frame design (plastic, glass, wood, metal, stone).
Option of setting light scenes, where with a single press, you can control units of iNELS RF Control.
Battery power supply (3 V CR 2032 battery - included in the supply)with a battery life of around 5 years based on frequency of use.
Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO2.
RFWB enables communication (RFIO2) and can thus communicate with the CU3-02M.