The switching unit with 1 output channel 16 A is used to control appliances, and lights (easy to integrate it to control garage doors or gates).
They can be combined with detectors, controllers, iNELS RF Control, or system components.
RFSA-61B: multifunction design – button, impulse relay, and time function of delayed ON or OFF with time setting of 2 s – 60 min.
The switching unit may be controlled by up to 25-channels.
The programming button on the unit is also used for manual control of the output.
Memory status can be pre-set in the event of a power failure.
Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO2.
The BOX design lets you mount it right in an installation box, a ceiling, or a controlled appliance cover.
E-shop
English
Česky
Slovensky
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
English GB
Српски
