Switch unit with input for external button, 1 channel - RFSAI-61B-SL
Innovation of RFSAI-61B
The switching component with one/two output relays is used to control appliances and lights. Switches/buttons connected to the wiring can be used for control.
They can be combined with Detectors, Controllers, or iNELS RF Control System Components.
The BOX-SL version offers installation directly in the installation box, ceiling, or cover of the controlled appliance. Easy installation thanks to screwless terminals.
It allows the connection of switched loads with a total sum of 8 A (2,000 W).
Functions: for RFSAI 61B-SL and RFSAI 62B-SL - pushbutton, impulse relay, and time functions of a delayed start or return with time setting 2 s-60 min. Any function can be assigned to each output relay. For RFSAI-11B-SL, the button has a fixed function - ON / OFF.
The external button is assigned in the same way as the wireless one.
Each of the outputs can be controlled by up to 12/12 channels (1-channel represents one button on the controller). Up to 25 channels for RFSAI-61B-SL and RFSAI-11B-SL.
The programming button on the component also serves as a manual output control.
Possibility to set the output status memory in case of failure and subsequent power recovery.
The elements of the repeater can be set for the components via the RFAF / USB service device, PC, or application.
Range up to 200 m (outdoors), in case of insufficient signal between the controller and the device, use the RFRP-20 signal repeater or component with the RFIO2 protocol that supports this function.
Communication with bidirectional RFIO2 protocol.
The contact material of the AgSnO2 relay enables the switching of light ballasts.