Thermostat TER-7

DESCRIPTION

• Fixed levels of switching.
• PTC sensor is used for sensing, it is in-built in motor winding by its manufacturer or there is used an external PTC sensor.
• MEMORY function - relay is blocked in an error state until until operator intervention (press RESET button).
• RESET of faulty state: a) button on the front panel b) by external contact (remote by two wires).
• Function of short-circuit or sensor disconnection monitoring, red LED flashing indicates faulty sensor.
• Output contact: 2x changeover / DPDT 8 A / 250 V AC1.
• Red LED shines and indicates exceeded temperature.
• Terminals of sensor are galvanically separated, they can be shorted out by terminal PE without damaging the device.
• Multivoltage supply AC/DC 24 - 240 V.
• 1-MODULE, DIN rail mounting.

TECHNICAL PARAMETERS

• Voltage range: AC/ DC 24 - 240 V (AC 50 - 60 Hz) 
• Burden: max. 2 VA / 1 W 
• Number of contacts: 2x changeover / DPDT (AgNi / Silver Alloy) 
• Mounting: DIN rail EN 60715 
• Protection degree: IP40 from front panel / IP20 terminals 
• Dimensions: 90 x 17.6 x 64 mm (3.5˝ x 0.7˝ x 2.5˝) 
• Weight: 71 g (2.5 oz.) 

Downloads

• Datasheet TER-7

  Format: pdf | Size : 305 kB | 05. 06. 2020

• Manual multilanguage TER-7

  Format: pdf | Size : 1 MB | 02. 07. 2020

• Manual TER-7

  Format: pdf | Size : 178 kB | 05. 06. 2020