Input contacts converter
- 2x permanent contacts
RFIM-20B

The wireless contact converter changes your existing wired button/switch to a wireless one.

Description

  • RFIM-20B: the wireless contact converter changes your existing wired button/switch to a wireless one.
    - two inputs enable control of two units independent.
    - battery power supply (1x 3 V CR 2477 battery - included in the supply) with battery life of around 5 years based on frequency of use.
    - contact can be permanently closed (does not drain on the battery).
  • It can be used to transmit information on switching on the contact (detector, button, technology, logic output).
  • When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF/ON, blinds up/down).
  • Option of setting light scenes, where with a single press, you can control multiple units of iNELS RF Control.
  • Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
  • Communication frequency with bidirectional protocol RFIO.
  • The BOX design lets you mount it right in an installation box under the button or switch

Technical parameters

  • Supply voltage: 1x 3 V CR 2477 battery 
  • Transmission indication / function: orange LED
  • Number of inputs: 2
  • Range in free space: up to 200 m
  • Operating temperature: -10 to +50 °C
  • Operating position: any
  • Protection: IP30
  • Contamination degree: 2
  • Dimensions: 49 x 49 x 13 mm
 

Downloads

Calendar

<
October 2020
>
  • Mo
  • Tu
  • We
  • Th
  • Fr
  • Sa
  • Su
  •  
  •  
  •  
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

Customer Centre

Technical support

+420 573 514 242
support@elkoep.com

Complaints technician

+420 770 177 028
balla@elkoep.com