Switch unit, 2 channels - MULTI function RFSA-62B

The switching unit with 2 output channels 8A used to control two independent appliances.

DESCRIPTION

  • They can be combined with detectors, controllers, iNELS RF Control or system components.
  • Function: button, impulse relay and time function of delayed start and return with time setting range of 2 s - 60 min.
  • Each of the channels may be controlled by up to 12 channels.
  • The programming button on the unit is also used for manual control of the output. 
  • Memory status can be pre-set in the event of a power failure.
  • Range up to 100 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
  • Communication frequency with bidirectional protocol RFIO2.
  • The BOX design lets you mount it right in an installation box, a ceiling or controlled appliance cover.

TECHNICAL PARAMETERS

  • Supply voltage: 230 V AC 
  • Dissipated power: 0.7 W 
  • Number of contacts: 2 x switching 8 A (AgSnO2)
  • Wireless: each of the outputs up to 12 channels (buttons) 
  • Manual control: button PROG (ON/OFF) 
  • Mounting: free at lead-in wires
  • Protection:  IP30
  • Dimensions: 49 x 49 x 21 mm 
  • Weight: 46 g

Downloads

Calendar

<
June 2020
>
  • Mo
  • Tu
  • We
  • Th
  • Fr
  • Sa
  • Su
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

Customer Centre

Reception

+420 800 100 671
elko@elkoep.com

Technical support

+420 573 514 242
support@elkoep.com