Dimming actuator 3-channel DCDA-33M/RGB

For dimming LED and RGB sources 12-24 V DC by alternating current

: 8595188146807 | : 4680

DCDA-33M/RGB dimming actuator is designed for dimming RGB and LED light sources with power supply 12-24 V DC, which are controlled by variable current.
The actuator has three independent channels and each output channel is individually addressable and controllable.
If desired, the channels can be associated as a single actuator for actuating the RGB source.
DCDA-33M/RGB actuator can be controlled from the bus DALI, DMX or iNELS BUS.
DCDA-33M/RGB can directly control from the system iNELS where the communication interface is the installation iNELS BUS.
If ithe communication interface DALI or DMX is used, the DALI master EMDC-64M can be used.

Setting the communication interface and addresses of actuators is performed using DIP switches:

a) switch No. 1

b ) switch No. 2 (if that switch 1 is in the upper position)

Using the control buttons on the front panel, you can manually control the output.
The input circuits of communication interfaces are optically isolated from the supply voltage connected lamp unit, and is therefore resistant to electromagnetic interference.
DCDA-33M/RGB in 3-module is designed for panel mounting on DIN rail EN60715.