Analog-digital converter ADC3-60M

Description

• ADC3-60M is an analog-to-digital converter and is equipped with 6 analog inputs
• Analog inputs serve to connect temperature sensors or analog sensors that generates current or voltage signal.
• The analog inputs have a resolution of a 14-bit AD converter.
• The analog inputs have a common terminal COM.
• Analog inputs/ouputs are confi gurable in iDM3 independently as voltage (U) or current (I) or temperature.
• We recommend Clima sensor as a meteo station. There are four types: five to eight outputs. The top series off ers measuring of: rainfall, brightness, twilight, speed of wind, temperature and relative humidity.
• The red LEDs in the front panel indicate exceeding the range, interruption of a sensor or overload of Uref output.
• The temperature inputs at the top of the terminal are used to connect the following temperature sensors: TC, TZ.
• ADC3-60M in 3-MODULE version is designed for mounting into a switchboard, on a DIN rail EN60715.

Technical parameters

• Input: 1x temperature, 6x analog.; 0-10 V; 0-20 mA
• Supply voltage: BUS 27 V DC 
• Rated current from BUS: 100 mA (at 27 V DC)
• Housing: 3-MODULE
• Dimensions: 90 x 52 x 65 mm

 

 

Downloads

• Datasheet ADC3-60M

  Format: pdf | Size : 109 kB | 13. 12. 2023

• EC Declaration of conformity ADC3-60M

  Format: pdf | Size : 47 kB | 04. 12. 2017

• Manual multilanguage ADC3-60M

  Format: pdf | Size : 992 kB | 20. 04. 2020