ADC3-60M is an analog-to-digital converter and is equipped with 6 analog inputs.
Analog inputs serve to connect temperature sensors or analog sensors that generates current or voltage signal.
The analog inputs have a resolution of a 14-bit AD converter.
The analog inputs have a common terminal COM.
Analog inputs / ouputs are confi gurable in iDM3 independently as voltage (U) or current (I) or temperature.
We recommend Clima sensor as a meteo station. There are four types: fi ve to eight outputs. The top series off ers measuring of: rainfall, brightness, twilight, speed of wind, temperature and relative humidity.
The red LEDs in the front panel indicate exceeding the range, interruption of a sensor or overload of Uref output.
The temperature inputs at the top of the terminal are used to connect the following temperature sensors: TC, TZ.
ADC3-60M in 3-MODULE version is designed for mounting into a switchboard, on a DIN rail EN60715
Analog inputs: 6x voltage, current or temperature input
Number of inputs: 6
Supply voltage / tolerance: 27 V DC, -20 / +10 %
Protection degree: IP20 device, IP40 mounting in the switchboard
Installation: into a switchboard rail to DIN EN 60715