Wireless contact converter - RFIM-20B, RFIM-40B

Wireless contact converter can transform your existing button / switch to the wireless one

: 8595188137188 | : 8134

DESCRIPTION

It can be used to transfer an information about the contact status (close) - e.g. detector, button, technology, output.

2 types of switchers:
RFIM-20B - 2 inputs, intended for switching with button or impulse, and also for permanent contact = switch.
RFIM-40B - 4 inputs, intended for switching with button or impulse.

2 or 4 inputs enable your to control 2 units independently of each other.
After pressing the button, the set commands are transmitted (ON/OFF, dimming, scheduled OFF/ON, roll up / down).
The possibility to set scenes - by one touch you can control more iNELS RF Control units.

TECHNICAL PARAMETERS

Battery-powered (3V/CR2477 or 2x3V/CR2477 - included in the package), battery life is up to 5 years.
Range up to 200 m (free open space), in the case of insufficient signal between controller and unit, please use the signal repeater - RFRP-20.
Communication frequency 868 MHz with two-ways protocol iNELS RF Control.
BOX design intended to be mounted directly into an installation box/under the existing button/switch