Combined motion, temperature, humidity and light intensity detector
DMD3-1

DESCRIPTION

•  DMD3-1 is a combined detector for ceiling mounting.
•  Possibilities to use the DMD3-1:
  - motion detector
  - sensor luminescence
  - temperature measuring
  ​- humidity measurement.
•  The unit is equipped with two communication interfaces:
  - installation iNELS BUS
  ​​- DALI (a maximum 4 pcs of DMD3-1 or DLS3-1 units can be used on one DALI bus).
•  The motion detector is used to detect people moving in the area. Using the passive scanning infrared spectrum for detection.
•  Integrated luminescence sensor can be used for sensing current luminescence at the point of installation of the unit. This information can be used in tasks to maintain a   constant luminescence. In space where it is possible, thanks to the contribution of natural light from the outside to adjust the artificial light, which can reduce energy   consumption.
•  Setting the communication interface is done using the SET button.
•  The unit can be configured via the iNELS3 Designer & Manager software,  which, among other things it is possible to:
  - set the desired function depending on detected motion
  - resolve jobs based on the value of luminescence
  - enable/disable the alarm LED on the detector housing.
•  DMD3-1 detector is designed for indoor installation and is not intended for outdoor use.
•  DMD3-1 detector is powered directly via the iNELS BUS installation (nominal 27 V DC) or DALI BUS (nominal 16 V DC).

Technical parameters 

• iNELS BUS/EBM: BUS
• DALI/DMX BUS: yes/no
• Supply voltage: BUS 27 V DC 
• Rated current from BUS: 18 mA (at 27 V DC)
• Housing: ceiling mounting
• Dimensions: Ø 76 x 73 mm

Downloads

• Datasheet DMD3-1

  Format: pdf | Size : 100 kB | 01. 10. 2022

• EC Declaration of conformity DMD3-1

  Format: pdf | Size : 39 kB | 23. 03. 2023

• Manual multilanguage DMD3-1

  Format: pdf | Size : 769 kB | 06. 08. 2021