Dimming actuator for RGBW strips - DA3-03M/RGBW

Description

• The dimmer for LED strips is used for independent control of 12 channels, so it can be connected to, for example:
  - 3 RGBW led strips
  - 3 RGB led strips + 2 single colour strips
  - 12 single colour LED strips
• The 3-module design of the device with mounting in the switchboard allows the connection of a dimmable load of 3x 15 A or 12x 3.75 A, which represents, for example: 3 pieces of RGBW LED strips 24 V 20W/m = max 18m.
• The dimmer is controlled by the central unit of the iNELS system.
• The power supply of the LED strip is in the range of 0-50V DC.
• Each of the output channels is separately controllable and addressable.
• The actuator is equipped with electronic thermal protection, which switches off the output in case of overheating.
• During installation, it is necessary to leave at least half a module of free space on each side of the actuator for better cooling.
• DA3-03M/RGBW in 3-MODUL design is intended for installation in a switchboard on an EN60715 DIN rail.

Downloads

• Datasheet DA3-03M RGBW

  Format: pdf | Size : 166 kB | 13. 12. 2023

• EC Declaration of conformity DA3-03M RGBW

  Format: pdf | Size : 500 kB | 13. 11. 2023