Dimming socket-plug
RFDSC-71

DESCRIPTION

• The dimmed socket is used to control light sources that are connected by power cord - especially lamps:
  R – classic lamps (resistive load)
  L – halogen lamps with wound transformer (inductive load)
  C – halogen lamps with electronic transformer (capacity load)
  ESL – dimmable energy-effi cient fl uorescent lamps
  LED – LED light sources equipped with LED.
• Multi-function 6 light functions - smooth increase or decrease with time setting 2 s - 30 min.
• Thanks to setting the min. brightness by potentiometer, you will eliminate flashing of the LED and ESL light sources.
• The universal dimmer may be controlled by up to 32 channels.
• The programming button on the socket is also used for manual control of the output.
• Memory status can be pre-set in the event of a power failure.
• Range up to 160 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
• Communication frequency with bidirectional protocol RFIO

Produced in 3 designs of sockets and plugs:

  a)  French (CZ, SK, PL, FR)
  b)  Schuko (HU, DE, RU, AT, RO, ES)
  c)  British (GB)

TECHNICAL PARAMETERS

• Type of load: R - L - C - LED - ESL max. 300 W/150 W
• Supply voltage (frequency): AC 230 V (50/60 Hz) or AC 120 V (60 Hz)
• Design: socket-plug
• Dimensions: 60 x 120 x 80 mm
• Protocol: RFIO

Downloads

• Datasheet RFDSC-71

  Format: pdf | Size : 229 kB | 24. 04. 2024

• Dimmer for LED light sources

  Format: pdf | Size : 58 kB | 24. 04. 2024

• EC Declaration of conformity RFDSC-71 RFDSC-11

  Format: pdf | Size : 50 kB | 24. 04. 2024