Thermo input 6channel TI3-60M

For connecting temperature sensor TC, TZ, Ni1000, Pt1000 or Pt100

: 8595188132893 | : 3289 standard

Unit TI3-60M is designed to connect up to six external temperature sensors.

Units range TI3 support the connection of the following temperature sensors:

TC / TZ - 2-wire connections
Ni1000, Pt1000, Pt100 - 2-wire and 3-wire.

It is used in cases where it is necessary to read the temperature, eg floor/room, indoor/outdoor temperature, process equipment - boiler, solar heating, etc.

Unit status is indicated by green RUN LED on the front panel:

If the supply voltage is connected (the unit is powered via the bus CIB), but there is no communication with the master, RUN LED is lit continuously.
If the supply voltage is connected and the unit communicates via standard CIB, RUN LED flashes.
The status on individual temperature inputs is indicated by the relevant red LED on the front panel – exceeding the scope or interruption of the sensor.
TI3-60M in 3 module is designed for switchboard mounting on DIN rail EN60715.