Lighting intensity controller LIC-1

DESCRIPTION

• Designed for dimming of incandescent bulbs and halogen lights with wound or electronic transformer, dimmable light bulbs and dimmable LED2 .
• Automatically regulates the intensity of light in a room.
• External sensor scans the intensity and based on the preset value it decreases or increases the brightness of light.
• Operating status:
  1 - Off .
  2 - Automatic regulation.
  3 - Cleaning (maximum level of illumination).
  4 - Setting the minimum lighting brightness.
  5 - Setting the desired level of illumination.
• Optional connection of buttons with 50 neon lamps.
• Blocking the automatic control via external signal.
• Power supply 230 V AC.
• 1-MODULE, DIN rail mounting, clamping terminals.

TECHNICAL PARAMETERS

• Voltage range: AC 230 V / 50 - 60 Hz 
• Maximum consumption: 1 W 
• Output contact: 2x MOSFET 
• Mounting: DIN rail EN 60715  
• LED indication: power supply - green, output - red 
• Protection degree: IP40 from front panel / IP10 terminals  
• Dimensions:  90 x 17.6 x 64 mm (3.5˝ x 0.7˝ x 2.5˝) 
• Weight: 66 g (2.33 oz.)  

Downloads

• Datasheet LIC-1

  Format: pdf | Size : 330 kB | 19. 12. 2019

• EC Declaration of conformity LIC-1

  Format: pdf | Size : 350 kB | 25. 07. 2020

• Manual LIC-1

  Format: pdf | Size : 205 kB | 14. 05. 2020

• Manual multilanguage LIC-1

  Format: pdf | Size : 2 MB | 02. 07. 2020

• Tested types of light sources

  Format: pdf | Size : 246 kB | 07. 02. 2019
• See more...