The switching unit with 1 output channel 16 A is used to control appliances, lights (easy to integrate it to control garage doors or gates).
They can be combined with detectors, controllers, iNELS RF Control or system components.
RFSA-11B: singlefunction design – switch on/off .
RFSA-61B: multifunction design – button, impulse relay and time function of delayed ON or OFF with time setting of 2 s – 60 min.
The switching unit may be controlled by up to 25-channels.
The programming button on the unit is also used for manual control of the output.
Memory status can be pre-set in the event of a power failure.
Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO2.
The BOX design lets you mount it right in an installation box, a ceiling or controlled appliance cover.
Technical parameters
Output: 1x NO, 16 A
Supply voltage (frequency): AC/DC 12-24 V (50/60 Hz), AC 120 V (60Hz) or AC 230 V (50/60 Hz)